This is an additonal receiver for use with the PB900 HDMI over IP network system.
* Flexible and scalable HDMI 1080p broadcasting within LAN (Local Area Network) * 1 to unlimited display broadcasting architecture, adding more displays without adding LAN bandwidth loading * IR Pass Thru delivers streaming up to 1080p HD video * Support up to 1080p (HDTV) full HD video and audio streaming * Ultra-High speed compression for high video quality, low latency and low bandwidth * Support all displays/TV with HDMI connector input * All available LAN technology can be used, e.g. Fast Ethernet, Gigabit Ethernet, WLAN and HomePlug adaptors * Plug and Play, no configuration required Product Specifications: HDMI Spec.:1.3 Compatible DVI Spec.:1.0 Compliant HDCP Spec.:1.2 Compliant Link Connector:RJ45 Power Consumption:3.2W Audio System:Stereo L/R Audio Resolution:16bit Video Format:*PB900 Sender: 480i/p, 576i/p, 720p, 1080i/p *PB900 Receiver: 480i/p, 576i/p, 720p, 1080p Refresh Rate:24Hz, 30Hz, 60Hz CAT5 Cable Length:100M Power Adapter:DC 5V/2A Dimension(LxWxH):134x120x27mm
*Note that if multiple receivers are used, the Sender will only accept IR feedback from the first Receiver to be powered up (first receiver it "handshakes" with). This is because the first powered receiver will usually be in the room you are viewing from and you would not normally want other rooms to then control what you are viewing. If you do require IR from every receiver then you can add this in the form of IR Anywhere modules (to keep it all on the IP network or a wireless solution such as the Powermid.
AV Products & Accessories - making AV happen 
)
