HDMI OVER IP PROFESSIONAL BROADCASTER

*This item is a pair, one PB5000 sender and one PB5000 IR type receiver*

The Aavara PB5000 system provides ultra high quality HDMI over IP video broadcasting for both AV and Digital Signage applications. It supports 1 to 1, 1 to many and multicast (multiple sources to many displays). Using a gigabit ethernet network Multicasting can be achieved without the need for an expensive managed switch, all that is required is to simply set the dip-switch on each sender to a unique channel number and set each receiver to match the required channel. The receivers come in two sorts; dip switch type (for receivers that don't need frequent changes, digital signage etc) and an IR verion for a quicker, remote controlled change.


FEATURES:
* 1080p Ultra High Quality Video transmission and Up to 16 Groups Multi-Casting
* Flexible and scalable HDMI 1080p broadcasting with Gigabit Ethernet LAN
* 1 to 1, 1 to many & multi-casting broadcasting architecture, adding more displays without adding LAN bandwidth loading
* Multi-Casting group with Gigabit Ethernet managed switch (required 802.11Q VLAN & IGMP function) support, Up to 16 multi-casting group support
* 16 sets C class IP Dip switch configuration on both Sender & Receiver for easy Multi-Casting group matching
* IR Pass-Thru on 1 to 1 extender configuration



SPECIFICATIONS:
* HDMI Spec.:1.3 Compatible
* DVI Spec.:1.0 Compliant
* HDCP Spec.:1.1/ 1.2 Compliant
* Sender Connector: Power Adapter in, RJ45, IR Emitter Connector, HDMI
* Receiver Connector:Power Adapter in, RJ45, HDMI
* Receiver- HDMI Audio Output:Stereo L/R, 16bits, 48Khz
* HDMI Video Resolution:480i/p, 576i/p, 720p, 1080i/p
* HDMI PC Resolution:Up to 1920x1080 @ 60Hz
* Extender Mode CAT5e Length:100M
* Extender Mode:Sender to Receiver by CAT5e/6/7 Cable directly
* Broadcaster Mode:Sender to Receiver via LAN (Local Area Network), One Sender to Many Receivers (Display/ TV/ Projector)
* Broadcaster Mode Length:Unlimited within LAN (Local Area Network)
* IR Control Pass Thru:IR Emitter to use infra Red Remote control of video source equipment(connected to sender) to control from Receiver side
* 1 to Many Broadcaster Mod:IR Control Pass-Thru will work only with first power on PB5000 Receiver as Remote Console
* Operating Temperature:0-40ºC
* Storage Temperature:-20~50ºC
* Humidity Range:5%~90%RH
* Power Consumption:5W
* Power Adapter:DC 5V/2A
* Material:Metal
* Dimensions sender:165x116x28mm
* Dimensions receiver:165x116x28mm
* Product Weight:325g
* Package Content:1080p HDMI Broadcaster Sender & Receiver, 5V DC Adapter, Usermanual, IR Emitter Cable

Have a look at the instruction manual here (Acrobat pdf file)

*Note that if multiple receivers are used, the Sender will only accept IR feedback from the first Receiver to be powered up (first receiver it "handshakes" with). This is because the first powered receiver will usually be in the room you are viewing from and you would not normally want other rooms to then control what you are viewing. If you do require IR from every receiver then you can add this in the form of IR Anywhere modules (to keep it all on the IP network or a wireless solution such as the Powermid.

Other related product codes:
Additional sender PB5000S
Additional receiver (dip switch type) PB5000R
Additional receiver (IR controlled type) PB5000IRR
Sender & receiver pair (dip switch type) PB5000
Pair of mounting brackets (one pair needed per unit to be mounted) MK100