Keene Electronics

Displaying all available data for item code C5QDA

KEENE CAT5 QUATTRO CAT5 AV DISTRIBUTION AMPLIFIER

Brand: Keene Electronics

[C5QDA] £ 299.00 (£ 260.00 ex VAT)

CAT5 Quattro Distribution Amplifier

The Keene C5QDA takes 4 independent video inputs and provides a separate CAT5 output for each. The unit can then be paired with the 4x4 matrix switcher of your choice to provide any input to any or all outputs, all via CAT5.The C5QDA provides infra red feedback from each remote receiver so you can still control the source equipment and matrix switchbox from each remote location. Supplied complete with four remote receivers.

Electronically each video channel is converted to the same high standard as the individual C5QCA. The C5QDA represents a considerable cost saving over four separate C5QCA units and makes a tidy solution to multiple source AV distribution.

Specifications (C5QDA main unit)
Power: 12DC @ 300mA or greater. (adaptor supplied)
Video bandwidth: 50MHz distortion: <50db up to 10Mhz AC coupled on composite video and luminance outputs
Audio distortion: <0.1% bandwidth: 20Hz 30KHz
Audio output impedance: 1K ohms each output
Audio input impedance: >10K ohms
Dimensions 217 x 115 x 35mm
Weight 775g (exc supply & cables)

Specifications (C5KDAR receiver)
Power: line powered via C5QDA (no external power needed)
Dimensions: 69 x 67 x 28mm
Weight:120g

[C5QDAE] £299.00 (euro supply)

Box contents:
1 x C5QDA main body
1 x KT5 mains adaptor
1 x IRUW universal IR output wand
4 x C5KDAR receivers
4 x IRSR standard receivers
Just run standard CAT5 cable from the C5QDA to each receiver and its ready to use!

Also available bundled with a Kramer 4x4 s-video matrix switcher here C5QDAK1

Also available bundled with an AVTool 4x4 composite matrix switcher here C5QDAK2

Optional items
PLB100 10m CAT5 cable
PLB200 20m CAT5 cable
IRWBR IRWBR wideband IR receiver
IRSP wall mount IR receiver
IRSPW wideband wall mount IR receiver

KEENE CAT5 QUATTRO CAT5 AV DISTRIBUTION AMPLIFIER

	[C5QDAE] £ 299.00 (£ 260.00 ex VAT)
	CAT5 Quattro Distribution Amplifier < more info

there are no customer reviews at present
want to be the first to offer a review?
to place a review click here

Ask a Question?

If you would like to ask us a question about this product, please feel free to click here to Ask a Question

Previous Questions

1 Steve m on 30 Nov 2008 asked :
"Hi Does this product transfer IR from Sky+? What is the maximum Cat5 cable length supported before signal quality is lost? thanks steve"

Keene replied: The receivers come with an IR receivers and a wand which is placed near or attached to the Sky box. It can travel to 300m.

2 Samir E on 17 Jul 2008 asked :
""KEENE CAT5 QUATTRO CAT5 AV DISTRIBUTION AMPLIFIER" does this product allow different receivers to watch different inputs independently? (ie. receiver 1 watches input 3, while receiver 2 watches input 2, etc)?"

Keene replied: Yes if used in conjunction with a matrix switcher.

If you feel something is not correct with this product please contact us using the same link

Tell a friend?

Want to tell a friend about this page?

Tell a friend