Ask a Question?

If you would like to ask us a question about this product, please feel free to click here to Ask a Question

Previous Questions

1 Cassidy k on 30 Apr 2011 asked  :
" Hi. I've purchased this along with the cat 5 adaptors with the intention of using economisers (split cat 5 cable). However it doesn't work. it works fine without the economisers....do you have any idea how to get it work. Do you know what wires within the ethernet adaptor it is making use of. The economisers are using 1-4 and then 5-8. any help much appreciated..."

Keene replied: Pins used are 5, 6, 7 & 8. Tip pin 8, ring 5+6 , gnd 7.

2 Paul on 11 May 2010 asked  :
"I have a question about "KEENE STANDARD IR RECIEVER" Could you please give the dimensions of this unit. Also, is it available with a black casing? "

Keene replied: 48mm l x 34mm w x 14mm h . It is not available in black

3 Andy S on 15 Jan 2010 asked  :
" I have a Sony STRDA 3200ES AV receiver which has an IR remote 3.5mm jack - will I be able to use my remote to operate the amp through this reciever, as the one on the front of the amp is blocked by other kit."

Keene replied: This won't work as it's designed to work with the Keene IR distribution amp kit unless you can find out what voltage the input on the receiver requires as we have a unit called KEENE IR RECEIVER ADAPTOR MODULE order code (KRECA) and this allows our receiver to plug in direct providing that the AV receiver requires 5 to 12v.

4 Richard S on 03 Dec 2009 asked  :
"I have an Arcam AVR250 receiver with an 'IR in' 3.5mm jack. Would this product enable me to control the receiver? If not, then do you stock a suitable receiver? Thanks."

Keene replied: It wiull allow this but you would have to use it in conjunction with :- http://www.keene.co.uk/electronics/multi.php?mycode=kreca

5 John on 20 Nov 2009 asked  :
" Can 2 of these be connected to a single IR distribution amp using a splitter?"

Keene replied: Yes this is possible using the correct splitter. Order code KA109.

6 Alistair on 01 Nov 2009 asked  :
"Is this receiver suitable for use with the Xantech IR distribution blocks?"

Keene replied: No it is not. if you connect this to our IR module you could then connect the module to you Xantech. Order code for module is KRECA.

7 Ali on 18 Jun 2009 asked  :
"can use an extender cable, if so how long can it go?"

Keene replied: It will run up to about 10m with a 3.5mm jack cable or you could use our KA175 adaptors and use cat5 up to around 40m possibly 50metres. Web links 3.5mm cable:- http://www.keene.co.uk/electronics/multi.php?mycode=kld4010 Cat5 adaptor http://www.keene.co.uk/electronics/multi.php?mycode=ka175

8 Joseph W on 03 Jun 2009 asked  :
" Would this plug into the "KEENE IR ANYWHERE IR OVER IP MODULES" for use as a receiver?"

Keene replied: Yes you can use this receiver.

9 Neil on 03 Apr 2009 asked  :
"Can you tell me the length of the cable attached to this? Also, can you buy an extension cable for this receiver please?"

Keene replied: This is approx 1.2metres long.

10 Mike P on 16 Sep 2008 asked  :
""KEENE STANDARD IR RECIEVER". Will this work with Skyplus HD controllers?"

Keene replied: It should be fine.

11 Phillip M on 23 Aug 2008 asked  :
"I have a Sony DTR-DA5300ES AV amp which features one 3.5mm input and two 3.5mm outputs for use with an IR extender. Can you tell me if the Standard IR Receiver plus two of the IR Universal Wands will be compatible with my amplifier."

Keene replied: No it would not be compatible

If you feel something is not correct with this product please contact us using the same link