Ask a Question?

If you would like to ask us a question about this product, please feel free to click here to Ask a Question

Previous Questions

1 Derek m on 16 Feb 2012 asked  :
"i have virgin boxes in my house do these work with virgin box and can you change the channel with these. thanks "

Keene replied: It will work but will not provide IR control. You would need either of these :- http://www.keene.co.uk/electronics/multi.php?mycode=PU1106 Or http://www.keene.co.uk/electronics/multi.php?mycode=meg61

2 Daniel N on 21 Apr 2011 asked  :
" Can you put a HDMI distribution amp on the end of this?"

Keene replied: All HDMI distributions amps need to be as close to source device as possible. So this would not be recommend and unlikely to work.

3 Tony W on 14 Feb 2011 asked  :
" Is this item powered at bothends or one end only and if so which end"

Keene replied: It requires power at both ends.

4 Adrian on 09 Nov 2010 asked  :
" Does it support ifrared remote commands "

Keene replied: No

5 Chris on 12 May 2010 asked  :
"Can I use these with powerline adapters? ie with the devices that trasmit data via electricity sockets?"

Keene replied: No but you could use the PB900 system. Web link:- http://www.keene.co.uk/electronics/multi.php?mycode=pb900

6 John A on 06 May 2010 asked  :
" What a good service! I already have one of your HDEX344 working fine. I want to install another one from sky plus box using splitter CLUX12S, is this compatible, will it work? (Both hd tvs are 20 metres from the sky box) Thanks"

Keene replied: Yes this will be comaptible.

7 Norman F on 04 May 2010 asked  :
" Sky HD does not output audio via HDMI, only with optical. How do you get the audio into the Cat5 or do you need to run an optical cable to the second room as well?"

Keene replied: HDMI does give audio out but is is only stereo audio not 5.1 which can only be achieved by running the optical out. So if you wanted 5.1 you would need to run an optical cable.

8 Mark on 07 Apr 2010 asked  :
" will this take the new 3D over cat5e rather than cat6 over 45m?"

Keene replied: These won't work with 3d TV. The only ones that will work are HDMI v1.4 cat5e extenders. At present we don't stock any 1.4 extenders but we should have some in the near future.

9 Cliff on 05 Apr 2010 asked  :
" Is there any loss of quality using this over about 10M Cat6?"

Keene replied: No.

10 Herbert on 29 Mar 2010 asked  :
" Does it use 1 or 2 power supplies (if 1, what side? receiver or sender) Are these units available with European mains connector?"

Keene replied: It uses 2 mains adaptor. One at each end. They are worldwide compatible so you just need to use a travel adaptor on the end like the KAM1 that we stock.

11 Ian on 01 Feb 2010 asked  :
" do they transmit hd audio thanks"

Keene replied: Yes they transmit audio...

12 Mick A on 23 Jan 2010 asked  :
" I want this for sky hd do you have a splitter that will work with this as I want to have hdmi local to the sky box and downstairs over the cat6 cable I am currently using for SD Thanks Mick"

Keene replied: We do have splitter that will be comaptible order code CLUX12S.

13 Bindesh on 09 Jan 2010 asked  :
" Does this unit sent audio information as well or is a separate signal required for this. Regards, Bindesh"

Keene replied: It does send audio.

14 Dominic on 05 Jan 2010 asked  :
" Can you connect these into a standard network, or will these require a dedicated directly connected Cat5 cable?"

Keene replied: They required their own designated cat5 cables.

15 Andrew on 23 Dec 2009 asked  :
" Are these baluns HDCP complient? i.e would they work from a SKY HD box to a LCD/Plasma TV?"

Keene replied: Yes they are compliant and will work with Sky.

16 John B on 27 Nov 2009 asked  :
" Is this system HDCP compatible?"

Keene replied: Yes it is...

17 Trevor K on 02 Nov 2009 asked  :
" Is the product HDCP-compliant please?"

Keene replied: Yes it is complaint.

If you feel something is not correct with this product please contact us using the same link